Veratron VMH 35 - Engine Hours and Distance Traveled

DESCRIPTION
B001167
Icon/Text Information
Input signal Output Unit
Internal Frequency Resistive LIN
NMEA
2000
NMEA
2000
EasyLink
Ammeter - - - x x x x A
State of Charge - - - x x x - %
Battery
autonomy
x - - - x - - d / h
SOH Battery Status of
health
- - - x x x - %
Battery
temperature
- - - x x x - °C / °F
Engine coolant
temperature
- - x - x x x °C / °F
Engine coolant
pressure
- - - - x - - bar / psi
Engine oil
temperature
- - x - x x x °C / °F
Engine oil
pressure
- - x - x x x bar / psi
Boost pressure - - - - x - x bar / psi
Total engine
hours counter
- x - - x x - h
TRIP
Trip hours
counter
x - - - - - - h
TRIP Trip Distance x - - - - - - Mi / km /
nm
Engine speed - x - - x x - rpm
-
Speed through
water (STW)
- - - - x - - kmh /
mph / kn
-
GPS speed (SOG) x * - - - x x - kmh /
mph / kn
- Gear position - - - - x - - -
Note*: data received from integrated GPS module.
ENGINE HOURS
In the absence of data received from the NMEA 2000 network, the indicator considers the internally
calculated data. Time is count when the engine speed exceeds 300 RPM. In the presence of data from the
NMEA 2000 network, the indicator considers the data received from the network only if higher than the
internal data.
DISTANCE TRAVELED
The indicator internally calculates the distance travelled based on the speed value set in Sensors > Speed.