V660P INSTALLATION GUIDE 25
CHAPTER 3
Specifications
This chapter discusses the power requirements and dimensions of the V660p-1.
Unit Power
Requirement
• Input power rating: 5V DC, 2.2A
• Charging via USB-C to and external dock connector
• 2500mAh/7.3V Li-Ion rechargeable battery
Temperature
• Operating Environment:
• Temperature: 0° C to 45° C (32° F to 113° F)
• Relative humidity: 5% to 90% RH non-condensing
• Non-Operating Environment:
• Temperature: -20° C to 60° C (-4° F to 140° F)
• Relative humidity: 5% to 90% RH non-condensing
• Over Temperature Protection for Battery Pack:
• The highest specified charging temperature of battery pack is 47° C ± 2°
C.
• The lowest specified charging temperature of battery pack is 0° C ± 2° C.
Memory
• 2 GB RAM/16GB ROM
• Supports SD 3.0
Magnetic Card
Reader
• Triple-track
• Supports bi-directional card read
• Swipe speed at 10 IPS to 40 IPS
Smart Card
Reader
• ISO 7816, 1.8V, 3V, 5V
• Synchronous and asynchronous cards
SAM Card
Reader
• Two Security Access Module (SAM) card slot.
Integrated
Contactless
Reader
• ISO 14443, ISO 18092, EMV
To Next Page
