V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
5
VX 820 INSTALLATION GUIDE 9
CHAPTER 2
Setup
This chapter describes the setup procedure for the VX 820, in the following
sections:
• Select Location
• Unpack Shipping Carton
• Examine VX 820 Features
• MSAM / Micro SD Cards
• Cable Connections
• Cable Connections
• Power Supply
• Smart Card Reader Use
• Magnetic Card Reader Use
• Contactless Transactions
• Optional Accessories
Select Location
Use the following guidelines to select a location for the VX 820.
Ease of Use
• Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and the terminal, ECR, or computer
connected to the VX 820. For safety, do not string cables or cords across a
walkway.
Environmental
Factors
• Do not use the unit where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the unit away from direct sunlight and anything that radiates heat, such
as a stove or a motor.
• Do not use the VX 820 outdoors.
The VX 820 is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust can void any warranty.
To Next Page
Loading...
Need help?
General
