EasyManuals Logo

VeriFone Vx520 User Manual

VeriFone Vx520
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Page
10 (37)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.point.fi
1.6 Battery
The battery is attached by placing it on its slot and pressing it downwards.
To remove the battery, press the locking tab and pull the battery from its slot.
During normal use, the battery should be loaded when its indicator shows 1 bar or less. The
terminal starts charging the battery when it is connected to the power cord. When the battery is
charging, the LED-indicator blinks as an orange light. When the battery is fully charged the LED-
light turns green. When the battery is almost empty the light turns red. The terminal can be
connected to the power cord at all times; this does not affect the battery. It is recommended to
keep the terminal connected to the power cord during night time. This will charge the battery so
that it is fully charged at the start of the next work day, and also ensures the success of automatic
batch sendings during the night.

Other manuals for VeriFone Vx520

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VeriFone Vx520 and is the answer not in the manual?

VeriFone Vx520 Specifications

General IconGeneral
Peripheral PortsRS-232, USB
Power Supply100-240 VAC, 50/60 Hz
Operating Temperature0°C to 50°C (32°F to 122°F)
Processor400 MHz ARM11
Memory128 MB Flash
Display128 x 64 pixel LCD with backlight
ConnectivityDial-up, Ethernet
Card ReadersEMV chip
ContactlessOptional
PrinterIntegrated thermal printer
SecurityPCI PTS
SAM Slots3
ComplianceEMV Level 1 & 2, RoHS

Related product manuals