Page
13 (37)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.point.fi
1.10 Letters and special characters
To insert letters and special characters, press the number with the desired character once, and
after that press the ALPHA-button until the appropriate character appears. To switch capital letters
into lower case letters, press LILA3.
1= Q Z .
2= A B C
3= D E F
4= G H I
5= J K L
6= M N O
7= P R S
8= T U V
9= W X Y
0= - space +
*= , ‘ “
#= ! : ; @ = & / \ % $ _
1.11 Terminal start-up and shutdown
The terminal is switched on by pressing the Enter key for a while or by connecting it to the power
cord. To shutdown the terminal press the Cancel key until the terminal shuts down.
NOTE! The terminal will not shutdown, if the power cord is connected.
1.12 Testing the connection
Press LILA 1, Enter and choose SEND BATCH F2. The screen informs DIALING. If the terminal
successfully connects, the text CONNECTED appears on screen. A white bar and the text
RECEIVING are displayed on screen. The bar turns gradually black as the batch sending
progresses. The terminal downloads the blacklist and other required card information files from the
bank.
After this, the terminal is ready for use.
If the blacklist is not downloaded to the terminals memory, you can test the connection by
switching on the terminal.
The screen informs BLACKLIST MISSING UPDATE THE BLACKLIST? Press Enter, and the
terminal connects to the bank and downloads the blacklist and other required card information files.
If the connection is not working, see section 7 TROUBLESHOOTING for further information.
To Next Page
Loading...
Need help?
General
