Page
14 (37)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.point.fi
2. SETTINGS
2.1 Terminal settings
To get to the terminals setting menu, press LILA4 and Enter. Select EDIT F4.
Some of the listed settings are explained in later sections. The sections are marked in brackets.
BATCH TIME (2.3) Batch sending time
CASHIER NUMBER (2.4) Terminal’s cashier number
TCP/IP PARAMETERS DHCP / FIXED IP
LANGUAGE Terminal’s language (FIN/SWE/ENG)
EXTRA AMOUNT (5.4) Extra amount settings
CASH RECEIPT (5.1) YES / NO
POWER OPTIONS (2.7) Terminal’s power settings
AUTH. MANDATORY (5.6) YES/ NO
TIME SETTINGS (2.5) Time and date settings
VAT (5.5) YES / NO
PREAUTHORIZATION (5.7) YES / NO
SOUND (2.8) ON / OFF
AUDIT LOG IP (2.9)
2.2 Parameter printing
Press LILA4 and press Enter.
Choose PRINT F2 and PAREMETERS F2.
The terminal prints out the parameters list, which shows the technical settings of the terminal. This
list is good to save.
2.3 Batch time
The terminal will send the batch automatically if a sending time has been set in the settings.
Sending time can be at any time. We recommend that the time would be after the closing time of
your business. Even hours are not recommended (e.g. 2100).
If you do not wish to use the automatic sending time, set it to be at 9999. The batch must then be
sent manually.
To set the sending time, choose BATCH TIME F2 from the EDIT menu. Insert the desired sending
time with four digits (e.g. 0315), onto the screen.
To Next Page
Loading...
Need help?
General
