3. SETTINGS
3. SETTINGS
3.1 PAYMENT TERMINAL SETTINGS
The settings are described in greater detail below. The section concerned is specified
in brackets.
1. To access the Settings menu, press LILA4 and Enter.
2. Select EDIT.
BATCH TIME (3.3) Time for automatic batch transmission
CASHIER NUMBER (3.4.) Cashier number of the payment terminal
TCP/IP PARAMETRIT DHCP / FIXED IP (NOT IN USE)
LANGUAGE (3.5) The language options available
EXTRA AMOUNT (5.3) Settings of the Extra (Tip) function
CASH RECEIPT (5.1) YES/NO
POWER OPTIONS (3.6) Powersave settings of the payment terminal
AUTH. MANDATORY (5.5) YES/NO
TIME SETTINGS (3.7) Time and date
VAT (5.4) YES/NO
PREAUTHORIZATION (5.6) YES/NO
MULTICASHIER VER (5.8) YES/NO
3.2 HOW TO PRINT THE PARAMETERS
1. Press LILA4 and Enter.
2. Select PRINT and PARAMETERS.
• The payment terminal prints a list of parameters, which shows the settings
of the payment terminal. Save the printed list for later use.
3.3 BATCH TIME
• The payment terminal establishes a connection to the bank automatically, if a
batch transmission time has been specified in the settings and the payment terminal
is on at that time.
• The batch time should preferably be set to be after the opening hours. Avoid setting
the batch time on the hour.
1. Go to LÄHETYSAIKA BATCH TIME in the Settings menu.
2. Enter a desired batch time with four digits. For example, 0315.
If you want to turn off the batch time function, type 9999 here. You will then
have to send the batches to the bank manually.
3.4 CASHIER NUMBER
If you have more than one payment terminal, it is important to distinguish between
the different terminals based on their cashier number. The cashier number is printed
on the receipts, which helps to find the right payment terminal in case a transaction
needs to be tracked down at a later stage.
1. Go to KASSANUMERO CASHIER NUMBER in the Settings menu.
2. Enter a desired cashier number with three digits. For example, 001, 002, etc.
3.5 LANGUAGE
1. Go to LANGUAGE in the Settings menu.
2. Select Finnish, Swedish or English.
3.6 POWER OPTIONS
1. Go to VIRRANSÄÄSTÖ POWER OPTIONS in the Settings menu.
SHUT DOWN TIMER = Time after which the terminal switches off, given in seconds
(for example, 180 = 3 min). The payment terminal does not switch off if it is being
recharged. Further, the payment terminal does not switch off, if a screensaver is in
use. If you want to turn off the sleep mode, type 0.
ONLINE BAT PERCENT = The minimum battery charge enabling the terminal to
function, given as a percentage (for example, 20).
SLEEP TIMER = Time after which the payment terminal’s screensaver is activated,
given in seconds (for example, 90 = 1.5 min). The screensaver will not be activated,
if the payment terminal is being recharged. If you want to turn off the screensaver,
type 0.
3.7 HOW TO CHANGE THE TIME AND DATE
1. Go to AIKA ASETUKSET TIME SETTINGS in the Settings menu.
2. Select ADJUST CLOCK.
3. Select the item you want to change and change it.
4. Press Enter.
20 21
To Next Page
Loading...
