EasyManua.ls Logo

Verizon TCL LINKZONE 5G UW - Configuring LINKZONE via Admin Web UI; Admin UI Home Page

Verizon TCL LINKZONE 5G UW
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Chapter 6. Configuring Your LINKZONE via the
Admin Web UI
In this chapter, we will show you how to get the most out of your LINKZONE using the
admin web UI. In the admin web UI, you can configure Wi-Fi settings, view connected
devices, set up a guest network, and more.
6.1 Home
This section allows you to quickly check connection status, network information, device
information, and connected devices.
Wi-Fi
The Wi-Fi panel displays the current Wi-Fi status of primary and guest network. Click >
to go to Wi-Fi>Basic page.
To turn on or off Wi-Fi, move the On/Off slider to the On or off status. When Wi-Fi is
enabled, choose 2.4 GHz and/or 5 GHz. Enter the wireless network name (SSID) and
password correspondingly.
About
The About panel displays SIM card status, network name, network type, and network
connection status. Click > to go to About>Internet to know more about the internet
settings.
SIM Status
If SIM card is not detected or cannot be read, make sure the SIM card is properly
installed.
If SIM card is locked, click "Unlock your SIM" to jump to the SIM PIN Management page.
Enter the SIM lock code and click Apply. Make sure you enter the code correctly, or the
SIM card may be locked permanently. There is a limited number of attempts allowed.

Related product manuals