8
2.3 Insert the Battery
To Install the battery:
1. Align the metal contacts with the pins inside the battery compartment.
2. Press the battery down until it properly sits in place.
3. Press the back cover into place by aligning the tabs. It only fits one way.
1 2 3
NOTE:
Whenever you remove or insert the battery, ensure your LINKZONE is not connected to
any device or power source.
2.4 Charge the TCL LINKZONE 5G UW
Before setting up your LINKZONE, make sure LINKZONE is charged for at least 2 hours.
To charge the LINKZONE:
1. Connect one end of a USB-C cable to the device and the other end to a wall charger.
2. Insert the wall charger into AC power source.
To Next Page
Loading...
