Verizon TCL LINKZONE 5G UW User Manual

9
Chapter 3. Using TCL LINKZONE 5G UW
3.1 Turn your LINKZONE on or off
To turn your LINKZONE on or off:
1. Press and hold the power button to turn on your LINKZONE. When the display screen
lights up, remove your finger from the button.
2. Following the wakeup animation, select English or Spanish language, and then tap
on the Home screen icons to familiarize yourself with the menu and features of your
LINKZONE.
3. A single press of the power button will turn on the display screen and wake up the
device.
4. To turn LINKZONE off, press and hold the power button. Then tap “Shutdown” on the
touchscreen to power down the device, or tap “Restart” to power cycle your device.
3.2 Connect to LINKZONE network
You have two options to connect your LINKZONE to the network:
1. Wired connection using either option below:
• Connect the LINKZONE to your computer using the provided USB-C 3.0 cable.
• Connect one end of an Ethernet cable (sold separately) into the LAN port on the side
of LINKZONE and the other end to your computer.
NOTE:
The Ethernet connection must be enabled before use. Go to Menu>Settings>Ethernet>
Enable on the touchscreen to enable the connection.
2. Wireless Connection:
To establish wireless connection:

Verizon TCL LINKZONE 5G UW Specifications

General

Brand	Verizon
Model	TCL LINKZONE 5G UW
Category	Wireless Router
Language	English