24
client devices in the network. If the DHCP server function is disabled, the LINKZONE will
not assign IP addresses to the connected client devices. The IP address must be entered
on each client device.
IP filter
By default, any device connected to your LINKZONE network is allowed to access the
internet. Specify which device cannot access the internet by adding the device to the
blacklist.
MAC filter
By default, any device connected to your LINKZONE network is allowed to access the
internet. You can specify which device can or cannot access the internet by adding the
device to the blacklist or whitelist.
Disable All connected devices can access the internet.
Whitelist
Only devices with a MAC address in this list can access the
internet.
Blacklist Devices with a MAC address in this list cannot access the internet.
DDNS
WAN IP address is needed when some functions of your LINKZONE are enabled. If the
WAN IP address of your LINKZONE changes, these functions may not work properly.
The Dynamic Domain Name Server (DDNS) function allows you to map a dynamic WAN
IP address (public IP address) to a static domain name, helping internet users (WAN side)
access the LINKZONE network by static domain name.
UPnP
Universal Plug and Play (UPnP) is a set of networking protocols that allows connected
devices to discover each other and establish functional network services for data
sharing, communications, and entertainment.
DMZ
The DMZ separates LAN from the public internet. Certain network services in DMZ
cannot be accessed by external users. You can enable the DMZ function and set a new
host IP address to allow access .
VPN
Virtual Private Network (VPN) is a dedicated network across the shared or public
network (usually the internet). The VPN technology allows employees at a branch of
an enterprise and employees at the headquarters to exchange resources conveniently
without exposing these resources to other internet users.
Port Forwarding
This function directs the network services from your computer to a designated device on
your network.
Port Filtering
This function allows you to prevent the selected applications from accessing the internet.
You can customize additional applications through Start and End port or protocols.
To Next Page
Loading...
Need help?
General
