Vertiv Avocent MergePoint Unity User Manual

3.4.1 Rebooting the switch 21
3.4.2 Run diagnostics 21
3.4.3 Upgrading the switch firmware 21
3.4.4 Saving and restoring appliance configurations and appliance user databases 22
3.5 Network Settings 23
3.6 DNSSettings 24
3.7 Local UI Settings 24
3.7.1 Local port user settings 24
3.8 Virtual Media 25
3.8.1 Local virtual media settings 26
3.9 Modem Settings 26
3.10 Scan Mode 26
3.11 DSView Server IP Addresses 27
3.12 User Accounts 27
3.12.1 Managing local accounts 27
3.12.2 Access levels 27
3.13 SNMP Settings 28
3.14 Event Settings 29
3.15 Setting Event Destinations 29
3.16 Configuring IQ Modules 30
3.16.1 Upgrading IQ modules 30
3.17 Power Device Settings 31
4 KVMVideo Viewer 33
4.1 Virtual Media Sessions 33
4.2 KVM Session 33
4.3 Performance Errors 33
4.4 Java Versions 33
4.5 Opening a KVM Session 34
4.6 Saving the View 34
4.7 Pasting Text 34
4.8 Closing a KVM Video Viewer Session 35
4.9 KVMVideo Viewer Profile Settings 35
4.9.1 Refresh 35
4.9.2 Fit 35
4.9.3 Full Screen 35
4.9.4 Mini-Mode 36
4.9.5 Scaling 36
Vertiv™ | Vertiv™ Avocent® MergePoint Unity™ Switch for Dell® Installer/User Guide | ii

Vertiv Avocent MergePoint Unity Specifications

General

Brand	Vertiv
Model	Avocent MergePoint Unity
Category	Switch
Language	English