-or-
If the client workstation’s operating system supports drag-and-drop, select the desired ISO or
floppy image file from a program such as Windows Explorer or Mac Finder and drag it onto the
Mapping dialog box.
NOTE: After a physical drive or image is mapped, it may be used on the target device.
To unmap a virtual media drive:
1. From the Virtual Media menu, select the menu item of the mapped device next to the drive you
wish to unmap.
2. You will be prompted to confirm. Confirm or cancel the unmapping.
3. Repeat for any additional virtual media drives you wish to unmap.
To display virtual media drive details:
1. Display the Stats dialog box from the Tools-Stats tab of the KVMVideo Viewer menu. The
dialog box expands to display the Details table. Each row indicates:
• Target Drive - Name used for the mapped drive, such as Virtual CD 1 or Virtual CD 2.
• Mapped to - Identical to Drive information that appears in the Client View Drive column.
• Read Bytes and Write Bytes - Amount of data transferred since the mapping.
• Duration - Elapsed time since the drive was mapped.
2. To close the Details table, click Details again.
To reset all USB devices on the target device:
NOTE: The USB Reset feature resets every USB device on the target device, including the mouse and
keyboard. It should only be used when the target device is not responding.
1. In the Stats dialog box, click Details.
2. The Details box will appear. Click USB Reset.
3. A warning message will appear, indicating the possible effects of the reset. Confirm or cancel
the reset.
4. To close the Details box, click Details again.
5. Exporting
4.11.2 Creating an image
You can create an image file from a source file folder. The created image can then be mapped. You can
also add an image file.
To create or add an image:
1. Select Virtual Media - Create Image from the KVMVideo Viewer menu.
2. Browse to the location where you want to create the image.
3. After the image has been created, check the Mapped checkbox to map the image.
Vertiv™ | Vertiv™ Avocent® MergePoint Unity™ Switch for Dell® Installer/User Guide | 41
To Next Page
Loading...
