Environmental (Sensors)
The Environmental category is summarized by the following data points:
NOTE: Humidity values are blank when temperature-only sensors are used.
• Temperature Minimum: The lowest temperature within the device network.
• Temperature Maximum: The highest temperature within the device network.
• Temperature Average: The average temperature within the device network.
• Humidity Minimum: The lowest humidity within the device network.
• Humidity Maximum: The highest humidity within the device network.
• Humidity Average: The average humidity within the device network.
Notifications
Notifications shows outstanding alarms from devices in the device network.
4.4.2 Groups
After groups are established within the Group Configuration, the Groups view summarizes power and
environmental data. The available data points are as follows:
Group rPDU
• Energy: The total PDU energy within the group.
• Power Sum: The total PDU power load within the group.
• Power Minimum: The lowest PDU power load within the group.
• Power Maximum: The highest PDU power load within the group.
• Power Average: The average PDU power load within the group.
NOTE: These readings are repeated per phase (shown when only 3-phase PDUs present).
Group UPS
• Power Maximum: The highest UPS power load within the group.
• Power Average: The average UPS power load within the group.
• Battery Autonomy Minimum: The lowest UPS battery runtime within the group.
• Battery Autonomy Average: The average UPS battery runtime within the group.
• Battery Charge Minimum: The lowest UPS battery charge within the group.
• Battery Charge Average: The average UPS battery charge for the group.
Group Environmental
• Temperature Minimum: The lowest temperature within the group.
• Temperature Maximum: The highest temperature within the group.
Vertiv | Intelligent Rack PDU Installer/User Guide
54
To Next Page
Loading...
Need help?
General
