The Reboot section allows the user to perform a system reboot. This function will not affect power delivery
to connected equipment. Use the Firmware Update section to load firmware updates into the unit.
Firmware updates, when available, can be found on the Vertiv website: VertivCo.com/Firmware-Support.
You can also subscribe to a mailing list, to be notified of when firmware updates become available.
Firmware updates typically comes in a .zip archive file containing several files including the firmware
package itself, a copy of the SNMP MIB, a "readme" text file explaining how to install the firmware, and
various other support files as needed. Be sure to un-zip the archive and follow the included instructions.
NOTE: Firmware updates can be performed via HTTP interface only. Updates over the HTTPS interface
are not currently supported.
3.3.4 Help tab
Info
The Info Page displays the unit's current configuration information, including the device name and ID, the
type of IMD installed, the unit's current firmware versions, and network information. Manufacturer support
information is also here.
Figure 3.22 Info Page
3 Setup
47
To Next Page
Loading...
Need help?
General
