3 Installation
3.1 What’s Included
• EDGE UPS
• Quick install guide
• Safety and regulatory statements
• USB type A to B cable
• Rail kit box (except MT models)
• Left and right rail set
• 12 x Rail kit screws (M5 x 14mm) (2U/3U models)
• 10 x Rail kit screws (M5 x 14mm) (1U models)
• 4 x Tower feet (2U and 3U models only)
• 2 x UPS rack ears with 8 x rack ear screws (M4 x8mm) (except MT models)
• 2 x IEC C13 to C14 output cables
Input power cables (500-1500VA models)
• Input power cable IEC Schuko to IEC C13
• Input power cable BS1362 to IEC C13
• Input power cable AUS to IEC C13
Input power cables (2200-3000VA models)
• Input power cable IEC Schuko to IEC C19
• Input power cable BS1362 to IEC C19
• Input power cable AUS to IEC C19
3.2 Unpacking and Inspection
Unpack the UPS and conduct the following checks:
• Inspect the UPS for shipping damage. If any shipping damage is found, report it to the carrier
and your local dealer or your Vertiv representative immediately.
• Check the accessories included in packaging list. If there is any discrepancy, contact your local
dealer or your Vertiv representative immediately.
3 Installation
7
Liebert® EDGE Installer/User Guide
To Next Page
Loading...
Need help?
General