TABLE OF CONTENTS
1 Important Safety Instructions 1
2 EDGE Description 3
2.1 Available Models 3
2.2 Rear Panel Views 4
2.3 Front Panel 5
3 Installation 7
3.1 What’s Included 7
3.2 Unpacking and Inspection 7
3.3 Preparation for Installation 8
3.3.1 Installation Environment 8
3.3.2 Installation Clearances 8
3.4 Installing the UPS 8
3.4.1 Installation Environment 8
3.4.2 Installing a Mini Tower (MT) Model 11
3.5 Connecting Loads 11
3.6 USB Communication Connection 11
3.7 Emergency Power-off (EPO) Connection (Optional) 11
3.8 External Battery Cabinet Connection on 2U and 3U VRLA Models (Optional) 12
3.9 Network Communication Card Connection (Optional) 13
3.9.1 Connecting AC Input 13
4 Operations 15
4.1 Modes of Operation 15
4.1.1 Off Mode 15
4.1.2 On/Normal Mode 15
4.1.3 On/Automatic Voltage Regulation (AVR)/Boost1 Mode 15
4.1.4 On/Automatic Voltage Regulation (AVR)/Boost2 Mode 15
4.1.5 On/Automatic Voltage Regulation (AVR)/Buck Mode 15
4.1.6 On/Battery Mode 15
4.1.7 Fault Mode 15
4.1.8 Battery Self-test Mode 15
4.1.9 Controls 16
4.2 Startup wizard 17
4.2.1 Default Screen and Flow Screens 17
4.2.2 Main menu Screen 19
4.2.3 Status Screen 19
4.2.4 Settings Submenu 21
4.2.5 Control Screen 29
4.2.6 Log Screen 29
i
Liebert® EDGE Installer/User Guide
To Next Page
Loading...
Need help?
General