4.2 Startup wizard
On first start-up or after factory reset, the UPS will show Start Up Guidance screen, inform the user the
system language, system date, system time, output voltage and output frequency configuration.
To navigate the Startup wizard:
1. Use the arrow buttons to move the cursor between the Start Up settings, Previous, and Next
selections.
2. To change a Start Up setting:
a. Navigate to the setting using the arrow buttons.
b. Press the Enter button to select the highlighted setting.
c. Use the arrow buttons to alternate between setting options.
d. Press the Enter button to select the setting option or press the ESC button to cancel.
3. To navigate to the previous or next page:
a. Navigate to the Previous or Next selections.
b. Press the Enter button to select Previous or Next.
4.2.1 Default Screen and Flow Screens
At start-up, the UPS executes a system test and displays the Vertiv logo screen for about 10 seconds.
After the test completes, an overview screen shows status information, the active (green) power path, and
the non-working power path (gray).
4 Operations
17
Liebert® EDGE Installer/User Guide
To Next Page
Loading...
