The VETAPHONE equipment does not include the following safety
aspects
EMERGENCY STOP:
The VETAPHONE equipment typically is only a small part of a larger installation, and is therefore not
equipped with a separate emergency stop.
GUARDING OF ROTATING PARTS:
Rollers are not guarded. Guarding should be provided, where necessary by the user.
NOISE AND VIBRATION:
The user should make suitable arrangements during planning and installation, to keep noise and
vibration to a suitable level.
ROTATION SENSING AND CONTROL OF ROLLER:
By deactivating of the rotation control system, the roller can remain stationary while the corona
discharge is on. This can cause the roller covering and product to be burned through.
REMOVING OF ELECTRODE COVER
After mechanical removing of electrode cover for cleaning and maintenance, you must reinstall cover
before switching on the Corona
TREATMENT OF ITEMS:
The dwell-time for treatment of items should be limited to avoid the material and the electrode being
burned through
To Next Page
Loading...