Using this menu you can assign different audio inputs to different video inputs. For example, to use
the AV2 RCA audio inputs with AV3 (VGA/D-Sub 15), you simply select “AV3 audio source” and
change it to “AV2 (analogue)”.
Note that it is not possible to assign AV4 (digital) audio to any other input.
Remember, routing your OSSCs video output through equipment such as home theatre receivers or
video processors can in many instances add input lag. Routing the signal through home theatre
receivers, switches, splitters, audio integrators or other video processors can also increase the time it
takes to re-sync the signal on game titles which switch between 480i and 240p screen modes.
Firmware updates
New features are periodically added to the OSSC Pro in the form of firmware updates. The devices
firmware can be updated using an MicroSD card. Unlike the OSSC Classic, no special tool is
required to write the firmware update to the card. All that is needed is a FAT32 formatted MicroSD
card. Firmware updates are typically no bigger than 3MB, so any capacity card will suffice.
To update the firmware, remove your MicroSD card from the OSSC Pro, insert it into your
computers SD card reader and then copy over the new firmware file. Ensure that the firmware file is
renamed to “ossc_pro.bin”.
Once the firmware is copied over, re-insert the MicroSD card into the OSSC Pro and power on the
device. Open the on-screen menu and choose “Settings” and then “Fw. Update”. Follow the on-
screen prompts in order to update the firmware.
To check for the latest firmware, visit this page:-
https://junkerhq.net//xrgb/index.php?title=OSSC_Pro#Firmware_update
To Next Page
Loading...
