10
PCB 1500 PELTIER CRYOBATH
USER MANUAL
www.vicidbs.com
Version 1.03.0000
7. MAINTENANCE
The PCB 1500 requires very little routine maintenance by the user.
ATTENTION: Any operation that requires the units to be opened must only be
performed by VICI DBS technicians or authorized personnel.
Always unplug the power supply when opening the units
7.1. Cleaning the Unit
Use a humid cloth with (optionally) a small amount of neutral detergent to clean the instrument. Do not use
organic or abrasive solvents.
7.2. Water Level Alarm
Check for signs of water level.
It is recommended that this is done prior to starting analysis. If a “Water level” alarm is signalled
immediately check for spillage in the accessory compartment and remove it with appropriate measures.
Use the supplied bottle to rell the system with liquid via the inlet or outlet connectors until the light is
turned off.
To Next Page
Loading...
