Maintenance
47
Attaching ele-
ments
Screwing bolts
tighter
All bolts and nuts must be screwed tighter:
• after the first 5 working hours,
• depending on the usage frequency of the machine,
• at least once per season
Special torques
Take care of the special torques for the following screwed joints:
• 100 Nm skid saucer bolts
All skid saucer bolts must be screwed tight:
• after five working hours
• once per season
• after exchanging the blade holders
• 140 Nm blade holder nuts of the outer drums
• 60 Nm blade holder nuts of the inner drums
100 Nm
140 Nm
60 Nm
To Next Page
Loading...
