Maintenance
53
Lubrication
All grease nipples must be greased after every cleaning with a high-
pressure cleaner.
Pto drive shaft
An own operation manual of the manufacturer has been added to ev-
ery pto drive shaft. This operation manual contains detailed informa-
tion to the relevant pto drive shaft model.
Check protective parts
All protective parts of the pto drive shaft must be checked visually on
wear and damage. Exchange defective protective parts. An unprotect-
ed pto drive shaft or damaged protective parts can cause serious inju-
ries during use.
> Disconnect the pto drive shaft
> Grease the grease nipples every 20 working hours
> Check every 10 hours that the tubes of the pto drive shaft are slid-
ing correctly
> Largely grease the 2 joints of the pto drive shaft before commis-
sioning the machine
Hitch frame
> Grease the grease nipple
Lever
> Grease the grease nipple
Grease nipples
Grease
nipple
Grease
nipple
To Next Page
Loading...
