Maintenance
119
Friction clutch
Safety concerning maintenance work on the transmission
When working on the transmission the tractor must be stopped and
secured.
This prevents the machine from suddenly starting to rotate.
If the tractor and the PTO shaft have not been connected in
accordance with the instructions, serious accidents causing damage
to limbs can occur.
When working on the transmission:
• The tractor engine must be stopped.
• The ignition key must be removed.
• The tractor's PTO must be disconnected.
• The tractor hydraulic system must be disconnected.
• The hand brake should be activated.
Only to be carried out
after prolonged
standstill
Or every season
»Maintenance intervals« page 79
The friction clutch is bled in the following way:
T model
Open the guard and use a suitable tool to remove the lock on the
friction clutch.
Pull the PTO shaft back, free of the drawbar.
Tighten all bolts on the friction clutch.
Fit and tighten the PTO shaft fully on the drawbar.
To Next Page
Loading...
