Vicon Extra 832T PRO - Machine specification; Tractor requirements

About the machine
28
Machine
specification
•
1
PTO
 »Number of revolutions on the PTO« page 30
•
2
Extra equipment.
 »Rotor« page 59
•
3
Extra equipment
 »High skids« page 159
Tractor
requirements
Tractor weight and size
The tractor must be of the appropriate size for its weight. Local
regulations governing this relationship must be observed.
The correct ratio between tractor and machine ensures correct
braking functions and manoeuvrability.
An incorrect ratio between tractor and machine can be dangerous.
Unit 828T PRO 832T-CT PRO 835T-CT PRO
Own weight T model kg (lb) 1964 (4330) 2027 (4470) 2165 (4774)
Unladen weight CT model kg (lb) - 2225 (4906) 2270 (5005)
P.T.O. (power take off) RPM
540/1000
1
540/1000
1
540/1000
1
Power requirement, minimum kW (hp) 50 (70) 60 (80) 70 (90)
Number of cutting discs Qty 8 8 10
Number of knives Qty 24 24 30
RPM, cutting discs RPM 3000 3000 3000
RPM, rotors RPM
500
2
/600/900/
1015
2
500
2
/600/900/
1015
2
500
2
/600/900/
1015
2
Stubble height mm
(’’)
20-100
3
(
3
/
4
’’-4’’)
20-100
3
(
3
/
4
’’-4’’)
20-100
3
(
3
/
4
’’-4’’)
Hydraulic pressure bar (psi) 150 (2175) 150 (2175) 150 (2175)
Wheel dim 380/55-17 380/55-17 380/55-17
Tyre pressure bar (psi) 3.5 (50) 3.5 (50) 3.5 (50)
Noise level dB(A) 90 90 90
Cutting width m (’ ’’) 2.8 (9’ 2’’) 3.2 (10’ 6’’) 3.5 m (11' 6'')
Cutting speed km/h (mph) 6-15 (3.7-9.3) 6-15 (3.7-9.3) 6-15 (3.7-9.3)
Transport width m (’ ’’) 2.7 (8’ 10’’) 3.0 (9’ 10’’) 3.4 (11’ 2’’)