Operation
53
Operation
Safety
The operator should be instructed carefully before the machine
is put into use
Only use the machine when the operator has been given thorough
instructions.
Thorough machine instruction results in safe usage.
Insufficient instruction can result in incorrect use of the machine and
accidents.
The side guard for the cutting unit must be correctly positioned
before start up
The side guard for the cutting unit must be folded out and correctly
positioned before the machine is started.
This ensures that the machine will give maximum protection to the
operator.
Moving objects may cause serious injuries and accidents.
The machine is operated in the following way:
Make sure that no bypassing persons are in the surrounding area.
Fasten all the guards on the machine.
Check that the side guard on the cutting unit are folded out and
correctly positioned.
Position the tractor and the machine in a straight line.
To Next Page
Loading...
