Maintenance
77
Maintenance
For your own
safety
Comply with the service and maintenance intervals given in the
instructions
Comply with the intervals for service and maintenance as given in the
instructions.
By complying with the maintenance intervals you assure that the
machine will operate without malfunctions and give maximum
protection to the surroundings.
An incorrectly maintained machine is a danger to the environment.
Specific safety
information
• Repair and maintenance work should only be performed if you
have the necessary professional knowledge and the proper tools.
• The P.T.O. on the tractor should be disconnected, and the motor
should be stopped.
• Make sure that the handbrake is applied and the ignition key has
been removed from the tractor.
• Make sure the machine is secured with wedges at the wheels
before starting work.
• No one should be in between the tractor and the machine if the
machine has not been secured.
• Always use original spare parts on the machine.
• Never use an air pressure lubrication spray to lubricate the
machine bearings.
• When carrying out any type of service and maintenance work
where the machine's cutting unit is raised up, the mechanical
safety valve must always be closed.
Lubrication safety
and use of oil
Oils and lubricants contain additives that under certain circumstances
can have serious consequences on your health. Therefore, when
using oil and lubricants be aware of the following:
• Avoid direct contact with these agents. It can cause injuries to your
skin.
• Protect your skin with protective creme or protection gloves.
• Never use oil or lubricants for cleaning your hands.
• Clothes contaminated with oil should be changed immediately.
• Oily clothes should not be kept in your pockets.
• Used oil must be collected and be delivered to a disposal
company, where the oil will be processed according to the
governing regulations.
• Contact medical help in case of skin injuries caused by oil or
lubricants.
To Next Page
Loading...
