Extra equipment
161
1015 RPM
When cutting difficult
crops and/or Bx
equipment fitted
The machine can be fitted with a set consisting of a V-belt pulley and
3 V-belt parts, which change the speed of the machine's rotor to 1015
rpm. It is recommended that this extra equipment be used for cutting
difficult crops and/or when Bx equipment is fitted to the machine.
»Rotor« page 59
Nylon Y-fingers on
the rotor
Not available for the
835CT Pro
The machine's rotor can be fitted, if required, with Y-fingers made from
nylon.
To Next Page
Loading...
