Maintenance
157
Fit the cover.
Fit the bolts.
Accumulator
Very high amount of accumulated pressure in the accumulator
Do not attempt to replace the accumulator.
The accumulator contains a very high accumulated pressure and may
only be replaced by authorised persons.
Attempting to replace the accumulator can lead to serious injury and
death.
As required
The machine is fitted with an accumulator that can absorb
unintentional shock from the cutting unit when the machine is in its
transportable position.
Pressure in the accumulator: 145 bar. (2105 psi)
The accumulator may only be replaced by authorised service
personal.
To Next Page
Loading...
