Vicon Extra 832T PRO - Page 85

Maintenance
85
CT model
 Turn the P.T.O. shaft until the grease nipple is visible.
 Press the nozzle of the grease gun onto the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 79
 »Lubricants« page 170
 Move the cover to the side.
 Turn the P.T.O. shaft until the grease nipple is visible.
 Press the nozzle of the grease gun onto the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 Move the cover back.
 »Maintenance intervals« page 79
 »Lubricants« page 170
 Turn the P.T.O. shaft until the grease nipple is visible.
 Press the nozzle of the grease gun onto the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 79
 »Lubricants« page 170
 Turn the P.T.O. shaft until the grease nipple is visible.
 Press the nozzle of the grease gun onto the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 79
 »Lubricants« page 170
58.237.000
58.237.000
58.237.000
58.237.000