Vicon Extra 832T PRO - Page 94

Maintenance
94
CT model
The oil level is checked as follows:
 Remove the dipstick.
 Check that the oil level is up to the “max” indication on the dipstick.
The oil level on the main gear must always be between “min.” and
“max.” as shown on the dipstick.
When topping up, do the following:
 Pour the oil through the hole where the dipstick is fitted.
 Fit the dipstick on the gear and remove the dipstick again.
 Check that the oil level is up to the “max” indication on the dipstick.
 Repeat the procedure until the correct oil level is reached.
 »Lubricants« page 170
Min.
Max.
Dipstick