Need help?Do you have a question about the Victor C6000 and is the answer not in the manual?
General| Brand | Victor |
|---|---|
| Model | C6000 |
| Category | Calculator |
| Language | English |
Example: Enter 6 Feet 4-13/16 Inches for linear measurements.
Example: Enter 54 Square Feet or 54 Cubic Feet for area/volume.
Example: Add 3 Feet 6 Inches and 4-13/16 Inches using dimension keys.
Example: Subtract 11 Inches from 4 Feet 2 Inches with dimension inputs.
Example: Multiply 14 Feet by 5 Feet using dimension keys.
Example: Divide 7 Feet 6 Inches by 2 using dimension inputs.
Example: Find 20% of 600 Feet using percentage function.
Example: Convert 13 Feet to Yards, Inches, or Meters.
Example: Convert 10 Feet 8-1/2 Inches to Decimal Feet.
Example: Convert 20.7 Feet to Feet-Inch-Fractions.
Example: Convert 10-1/2 Inches to Decimal Inches.
Example: Convert 10.25 Inches to Fractional Inches.
Example: Convert 21 Square Feet to Square Inches or Square Yards.
Example: Convert 25 Cubic Feet to Cubic Inches or Cubic Yards.
Example: Convert Pounds to Kilograms, Tons, and Metric Tons.
Example: Convert concrete volume to weight units.
Example: How many cuts to get from a 20-foot board.
Example: Total combined width of four window openings.
Example: Finding the center point distance in a rectangular room.
Example: Floor area of a square closet.
Example: Floor area of a hallway.
Example: Room dimensions to find wall area and total surface area.
Example: Room dimensions to find square-up and perimeter.
Example: Volume of a space in Cubic Feet and Cubic Yards.
Example: Convert concrete volume to weight units.
Example: Calculate properties of a 6-sided polygon using its radius.
Example: Calculate volume and cost of concrete for a patio.
Example: Calculate combined board feet and cost for multiple boards.
Example: Convert cubic feet volume to board feet.
Example: Calculate circle's area and circumference from its diameter.
Example: Calculate arc length using the radius and arc angle.
Example: Calculate radius and arc values from chord length and segment rise.
Example: Calculate window arch angle, length, area, and wall lengths.
Example: Determine studs needed for a 20-ft wall with 16-inch spacing.
Example: Calculate drywall sheets for a 160 sq ft wall.
Example: Calculate drywall sheets for a 50-ft long wall.
Example: Find miter and bevel angles for crown moulding installation.
Instructions for modifying default stair variables like riser height and tread width.
Example: Calculate exact baluster spacing and number needed for a handrail.
Example: Convert pitch degrees to percent grade and pitch in inches.
Example: Convert percent grade to slope, pitch in inches, and pitch degrees.
Example: Convert pitch ratio to pitch in inches, degrees, and percent grade.
Example: Calculate fill volume for a sloped retaining wall using percent grade.
Definitions of common roofing terms and rafter types.
Example: Determine stud lengths and angle of incline for a rake-wall with a base.
Example: Calculate roof area, squares, bundles, and sheets from pitch and floor area.
Example: Convert angles between decimal degrees and D:M:S format.
Example: Perform time addition or subtraction with hours, minutes, and seconds.
To Next Page
