66250754-EN - V1.0 - 18/02/19
- 71 -
4000 Series GSM Audio Intercom - Technical Manual
4000 Series GSM Audio Intercom with Proximity
A note of the access levels should be kept (from 0 to 9), following the table format below:
ACCESS LEVEL
NUMBER
ATB TIMEBAND NUMBER READER (UNIT) ID
0 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8
Access Level 0
Access Level 9
USING THE GSMSK PC SOFTWARE TO MANAGE USER INFORMATION AND DOWNLOAD STORED EVENTS
Because of the high volume of user information that may need to be recorded it is possible to use the GSMSK PC software (version
4.0.0.0 or later) to record and save the user’s information as an excel spreadsheet using the ‘Export’ feature. The GSMSK software
can be used to record and save the call button setup (including divert numbers), the dial to open numbers, the proximity fob/card
numbers and access codes. The software can also be used to download up to 4000 stored events from the GSM PRO module.
Further information on how to do this can be found in the following technical manual:
• GSMSK_66251720_EN_V2-0 (or later version)
MANAGING GSM EVENTS REMOTELY
Users can also remotely monitor events in real-time from the GSM PRO module using Videx’s web browser based events application.
These events can then be viewed on any device such as a tablet, smartphone, laptop and PC.
IMPORTANT NOTE: The SIM card used in the GSM PRO intercom requires a data package to be included in order to send the
events to the server. Setup of the system only requires a few short steps and help on this can be found once registered and
logged in.
Further details on how to register an online prole for this application can be found on the website: www.videxevents.co.uk
User Management
To Next Page
Loading...
