Videx 4000 Series - User Management

66250754-EN - V1.0 - 18/02/19
- 70 -
4000 Series GSM Audio Intercom - Technical Manual
4000 Series GSM Audio Intercom with Proximity
RECORD SHEET
In order to manage the GSM PRO intercom more eectively it is recommended that an up to date record sheet is kept for all the
programming particularly if there is a high volume of telephone numbers, fob/cards, access codes and system settings stored in the
GSM intercom. This will also be useful if any future changes need to be made. The following table format can be used to record the
GSM’s basic information.
GSM PRO intercom telephone No.
IMEI number
Master code (default 1111)
Master telephone No.
The table format below can be used to record the call button numbers and the three divert numbers (from 001 to 050).
BUTTON MEM. LOCATION TELEPHONE NO. USERNAME
Button 1 (primary pn) STN001
Button 1 (divert d1) STD001
Button 1 (divert d2) STE001
Button 1 (divert d3) STF001
   
Button 50 STN050
Button 50 (divert d1) STD050
Button 50 (divert d2) STE050
Button 50 (divert d3) STF050
It is also recommended that a record sheet of the dial to open DTO (STR) numbers, username and access level is kept (from 000 to
999), following the table format below:
MEM. LOCATION TELEPHONE NO. USERNAME ACCESS LEVEL
STR000....STR999
If the onboard proximity reader and/or Art.4850R expansion reader(s) is being used it is recommended that a record sheet of the
fob/card (FOB) numbers, username and access level is kept (from 000 to 999), following the table format below:
MEM. LOCATION SITE CODE USER CODE USERNAME ACCESS LEVEL
FOB000....FOB999
If the Art.4903 codelock is being used, via RS485 bus connection, it is recommended that a record sheet of the access codes (PIN),
relays to activate and access level is kept (from 000 to 399), following the table format below:
MEM. LOCATION ACCESS CODE RLY1 RLY2 USERNAME ACCESS LEVEL
PIN000....PIN399
A note of the call button timeband (TBA) should be kept, following the table format below:
ON TIME OFF TIME Su Mo Tu We Th Fr Sa
Timeband
A note of the access control timebands (ATB) should be kept (from 0 to 9), following the table format below:
TIMEBAND NO. ON TIME OFF TIME Su Mo Tu We Th Fr Sa
Timeband 0 : :
  
Timeband 9 : :
A note of the free access timebands (FRE) should be kept (from 0 to 9), following the table format below:
TIMEBAND NO. ON TIME OFF TIME Su Mo Tu We Th Fr Sa RLY AO1 AO2 LAT MOM
Timeband 0 : :
  
Timeband 9 : :
User Management