Videx 4812 - Page 34

66251750-EN - V1.0 - 05/06/17
34
4000 Series Vandal Resistant Digital GSM - Technical Manual
4000 Series Vandal Resistant Digital GSM Audio Intercom with Proximity
Programming Flowcharts
5. TIME SETTINGS MENU
MAIN PROGRAMMING MENU
PROG. MENU VER DG4.0.1
1: 2: 3:
4: 5:
to exit
To exit from the main programming menu
press the CLEAR button
to return to the
default welcome screen.
TIME SETTINGS MENU
On the time settings menu it is possible to setup
the following: 1.Call time, 2.Divert time, 3.Open
time, 4.Aux time, 5.Timebands, 6.LCD time. Press
the relevant button to setup the appropriate
time. To return to the main programming menu
press the CLEAR button
.
to exit
1. CALL TIME:040
2. DIVERT TIME:015
3. OPEN TIME:005
4. AUX TIME:005
5. TIMEBANDS
6. LCD TIME:000
to confirm
to cancel
CALL TIME: (1-255 Sec)
040
to confirm
to cancel
DIVERT TIME: (1-255 Sec)
015
to confirm
to cancel
OPEN TIME: (1-255 Sec)
005
1. CALL TIME 2. DIVERT TIME 3. OPEN TIME
The default call time will be displayed on the
screen. To change the time enter the new
time required (1-255 seconds) then press the
ENTER button
to conrm. To cancel and
return to the time settings menu press the
CLEAR button
.
The default divert time will be displayed on
the screen. To change the time enter the new
time required (1-255 seconds) then press the
ENTER button
to conrm. To cancel and
return to the time settings menu press the
CLEAR button
.
The default door open time will be displayed
on the screen. To change the time enter the
new time required (1-255 seconds) then press
the ENTER button
to conrm. To cancel
and return to the time settings menu press
the CLEAR button
.
TIME SETTINGS MENU
to exit
1. CALL TIME:040
2. DIVERT TIME:015
3. OPEN TIME:005
4. AUX TIME:005
5. TIMEBANDS
6. LCD TIME:000
To exit from the time settings menu press
the CLEAR button
to return to the main
programming menu.
to confirm
to cancel
AUX TIME: (1-255 Sec)
005
TIMEBANDS
0> 0000-2359 1> 0000-2359
2> 0000-2359 3> 0000-2359
4> 0000-2359 5> 0000-2359
6> 0000-2359 7> 0000-2359
8> 0000-2359 9> 0000-2359
to exit SELECT 1-9
to confirm
to cancel
LCD TIME:
(1-255 Sec)
000
4. AUX TIME 5. TIMEBANDS 6. LCD TIME
The default auxiliary input time will be
displayed on the screen. To change the time
enter the new time required (1-255 seconds)
then press the ENTER button
to conrm.
To cancel and return to the time settings menu
press the CLEAR button
.
Refer to the owchart on page 31 to set up
timebands 1-9. Timeband 0 is the default
timeband and is set as “0000-2359” and
cannot be changed.
The default LCD switch time will be displayed
on the screen. To change the time enter the
new time required (1-255 seconds) then press
the ENTER button
to conrm. To cancel
and return to the time settings menu press the
CLEAR button
.