EasyManua.ls Logo

Videx VX2200 - Page 38

Videx VX2200
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAGE 38 of 80 VX2200 TECHNICAL MANUAL VER1.4
Notes
1
The voltage is available when the monitor is switched on and is normally only used
on coax video systems.
2
Only for monitors with memory board Art.35xx.
Art.3376 – Description of the signals on the Art.3980 back plate
Set as non-coax Set as coax
1
Not used
2
P3 – Push button
shorts to COM when pressed
3
P4 – Push button S
1
shorts to COM when pressed
4
DOL - Door open LED signal (+12Vdc 5mA signal)
5
+20 - +20Vdc monitor power supply
6
+20 - +20Vdc monitor power supply
7
V1 (balanced video signal sync-)
Not used
8
V2 (balanced video signal sync+)
V – Coax centre core
9
GNDV Ground reference for video signal
Screen of coax
10
+12 - 12Vdc output for coax video distributor Art.894 power supply
1
11
COM - Common terminal for P3 and P4
12
+MV - Ingresso +12Vdc oer alimentazione memoria video
2
13 L (Bus Data line)
14
- (Bus date line GND)
15
LB - Local bell input (Switch 0V input)
16
AL - Alarm signal input (Switched 0V input)
17
R-,R+ - Connection terminal for the additional relay board Art.402 (black
18
wire to terminal R-, red wire to terminal R+)
Art.3371 – Description of the signals on the Art.3980 back plate
Set as non-coax Set as coax
1
Not used
2
P3 – Push button
shorts to COM when pressed
3
P4 – Push button S
1
shorts to COM when pressed
4 P5 – Push button S
2
shorts to COM when pressed
5
+20 - +20Vdc monitor power supply
6
+20 - +20Vdc monitor power supply
7
V1 (balanced video signal sync-)
Not used
8
V2 (balanced video signal sync+)
V – Coax centre core
9
GNDV Ground reference for video signal
Screen of coax
10
+12 - 12Vdc output for coax video distributor Art.894 power supply
1
11
COM - Common terminal for P3, P4 and P5
12
+MV - Ingresso +12Vdc oer alimentazione memoria video
2
13 L (Bus Data line)
14
- (Bus date line GND)
15
LB - Local bell input (Switch 0V input)
16
AL - Alarm signal input (Switched 0V input)
17
R-,R+ - Connection terminal for the additional relay board Art.402 (black
18
wire to terminal R-, red wire to terminal R+)

Table of Contents

Other manuals for Videx VX2200

Related product manuals