VIDIR CAROUSEL MATE - Page 45

3
3
For service call
1-866-821-2647
6. Press
Change Blade: N/A
Press
Imperial or Metric
-----------------------------------------
| 1 IMPERIAL 2 METRIC |
| 1 |
-----------------------------------------
To change the setting:
1. Press
2. Press till you reach 1 (IMPERIAL).
3. Press
4. Press
Auto-Run N/A
Press
Carpet one calibration correct value is 228000
1. Press
(all data begins to blink)
2. Press (one digit begins to blink)
3. Press , to increment or decrement the value
4. Repeat steps 2 & 3 for remaining digits till desired value is
displayed 228000
5. Press
6. Press
7. Repeat the above steps for Carpet 2 and Vinyl.
8. Press