4
4
For service call
1-866-821-2647
Slow down N/A
Press
FS Auto Run N/A
Press
Turn the power off and then on The counter displays enter password.
Changing machine setup for counter.
1. Press (at the same time) counter displays “Config
password”
2. Press
3. Press (one digit begins to blink)
4. Press , to increment or decrement the value.
5. Repeat steps 2 & 3 for remaining digits till desired value
“2442” is displayed.
6. Press
7. Press to reach “2” for CM
8. Press
Counter displays “enter password.”
Master User’s Menu
Press the and (at the same time) the MASTER PASSWORD is brought up.
-----------------------------------
| MASTER PASSWORD |
| _ _ _ _ |
-----------------------------------
To enter the master password :
1. Press
(all data begins to blink)
2. Press
(one digit begins to blink)
3. Press , to increment or decrement the value
4. Repeat steps 2 & 3 for remaining digits till desired value 4321 is
displayed.
5. Press
6. Press “new password”
7. Press “new password timer”
To Next Page
Loading...