Viessmann B0KA - Mounting the Boiler on the Pre-Plumbing Jig or Mounting Frame; Mounting the Boiler and Making Connections; Removing the Front Panel

16
Removing the front panel
1.
2x
2.
3.
Fig. 7
1. Unlock the front panel on the underside (push in),
using a screwdriver or similar tool.
2. Swivel the front panel forwards slightly and lift
away upwards.
Mounting the boiler on the pre-plumbing jig or mounting frame
Note
Various installation components can be found in a sep-
arate pack. Keep the installation components safe, as
they will be required for later installation.
Installation sequence
Mounting the boiler and making connections
6179762
Installation