Viessmann B1HE-199 User Manual

Installation and Service
Instructions
VITODENS 100-W
6167 818 - 10 10/2022
for use by heating contractor
Please file in Service Binder
Read and save these instructions
for future reference.
Product may not be exactly as shown
IMPORTANT
Vitodens 100-W
B1HE Series and B1KE Combi Series
Wall mounted gas-fired condensing boiler with
3.5 inch black/white display
On demand domestic Hot Water with Combi Boilers
For operation with natural gas or liquid propane gas
Heating input: 8.5 to 199 MBH
2.5 to 58.3 kW
H

Viessmann B1HE-199 Specifications

General

Output	199, 000 BTU/hr
Fuel Type	Natural Gas or Propane
Weight	163 lbs
AFUE	98%
Heat Exchanger Material	Stainless Steel
Type	Gas Condensing Boiler
Heating Capacity	199, 000 BTU/hr
Dimensions	700 x 400 x 299 mm
Efficiency	Up to 98% AFUE

Summary

Safety

Safety, Installation and Warranty Requirements

Overview of safety, installation, and warranty guidelines for the boiler.

Installation

Mounting the Boiler and Making Connections

Guide for mounting the boiler and making connections.

Piping Connections

Instructions for water and gas piping connections.

Electrical Connections

Guide for making electrical connections to the boiler.

Commissioning

Commissioning the System with the Commissioning Assistant

Guide to using the commissioning assistant for initial setup.

Filling the Heating System

Checking the Combustion Quality

Measuring and verifying combustion parameters.

Service

Removing the Burner

Checking the Ignition and Ionization Electrodes

Diagnostics and Service Checks

Checking Outputs (actuator test)

Troubleshooting

Fault Display on the Programming Unit

Understanding and displaying fault messages on the unit.

Repairs

Specification

Technical Data