28
If you are continuously at home for one or more days
but do not want to change the time program, select the
function "Holidays at home" , e.g. on public holi-
days or when the children are on school holidays.
The function "Holidays at home" has the following
effect:
■
The room temperature during the periods between
the set time phases is raised to the set value of the
first time phase of the day: From reduced room tem-
perature to standard room temperature or comfort
room temperature
■
If no time phase is active before 00:00, your rooms
are heated to the reduced room temperature until the
next time phase becomes active.
■
DHW heating is active.
■
The "Holidays at home" function starts and ends
according to the set times for the start date and end
date.
Note
■
As long as the "Holidays at home" function is
switched on, the default display shows "Holidays at
home" and the set start date and end date.
■
If "Detached house" was selected by your contrac-
tor during commissioning, the function is adopted for
all heating/cooling circuits.
Example:
For Monday and Tuesday, 2 time phases are set
respectively.
Mo
u
0 2 4 6 8 10 12 14 16 18 20 22 24
Tu
2 4 6 8 10 12 14 16 18 20 22 24
Mo
0 2 4 6 8 10 12 14 16 18 20 22 24
Tu
2 4 6 8 10 12 14 16 18 20 22 24
A B C C B
A B C
Fig. 10
Temperature level according to the set time pro-
gram
Temperature level if "Holidays at home" is
switched on.
A
Reduced room temperature
B
Standard room temperature
C
Comfort room temperature
Switching on "Holidays at home"
Tap the following buttons:
1.
2. "Holidays at home"
3. for the required heating/cooling circuit
4. for "Start" and "End"
5. to confirm
Switching off "Holidays at home"
Tap the following buttons:
1.
2. "Holidays at home"
3. for the required heating/cooling circuit
4.
Saving energy during long periods of absence
To save energy during long periods of absence, select
"Holiday program" .
Room heating/room cooling
Adjusting the room temperature for longer periods at home
6171827
To Next Page
Loading...
