Viessmann VITODENS - Deactivating the Display Screen for Cleaning

43
4. Required display
5. OK/ to confirm
Note
If you tap , the selected display will appear.
Deactivating the display screen for cleaning
If you wish to clean the display screen, you can deacti-
vate it for 30 seconds. This prevents unintentional
actions while touching the screen.
Tap the following on-screen buttons:
1. "Menu"/" "
2. "Settings"
3. "Clean screen"
The screen is deactivated and a countdown
begins.
Restoring the factory settings
You can individually restore all modified values for
each heating circuit to their factory setting.
Note
If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is
retained.
Settings and values that are reset:
■
Set room temperature
■
Set reduced room temperature
■
Operating program
■
Set DHW temperature
■
Time program for central heating
■
Time program for DHW heating
■
Time program for DHW circulation pump
■
Heating curve slope and level
■
Comfort and energy saving functions are deleted.
Tap the following on-screen buttons:
1. "Menu"/" "
2. "Settings"
3. "Factory setting"
4. "Heating circuit 1 2 3" for the required heating cir-
cuit
5. OK/ to confirm
Further adjustments
Permanently selecting the default display (cont.)
5811580