Viessmann Vitopend 100-W Installation And Service Instructions

62
Calling up the main parameter level:
1. Press MODE to select the required
settings.
2. Use / to select the required
value.
■ Use OK to confirm and exit the
menu.
■ Or
■ Press MODE to confirm and to
change to the next setting.
Note
The settings shown depend on the
equipment level of the heating system.
Set DHW temperature
Symbols Main display Additional display
Flashing Constant
Temperature in °C
Set heating water temperature
Symbols Main display Additional display
Flashing Constant
Temperature in °C
Set room temperature
Symbols Main display Additional display
Flashing Constant
Temperature in °C
Heating curve
Symbols Main display Additional display
Flashing Constant
Heating curve "1" to
"6" or "dEF" for facto-
ry setting
Time program, switching DHW heating on/off
Symbols Main display Additional display
Flashing Constant
p
"SEt" "On"
or
"OFF"
Parameter
Main parameter level
5837146

Viessmann Vitopend 100-W Specifications

General

Fuel Type	Gas
Max. Water Temperature	85 °C
Type	Condensing Boiler
Gas Type	Natural gas / LPG
Efficiency	Up to 98%