70
Check Display Symbols
Flashing Constant
Current system pressure "IF00" MPa
Actual heating water temperature "IF01" °C
Set heating water temperature "IF02"
°C
Set maximum heating output "IF03" %
Actual DHW temperature "IF04" °C
Set DHW temperature "IF05"
°C
DHW flow rate "IF06"
Actual collector temperature (only in
conjunction with external extension)
"IF07"
°C
Actual cylinder temperature, bottom
(only in conjunction with external ex-
tension)
"IF08"
°C
Actual cylinder temperature, top (on-
ly in conjunction with external exten-
sion)
"IF09"
°C
Current outside temperature (for op-
eration with outside temperature sen-
sor)
"IF10" °C
Current room temperature (for opera-
tion with room temperature sensor)
"IF10" °C
Set heating curve (for operation with
outside temperature sensor)
"IF11"
Set room temperature (for operation
with room temperature sensor)
"IF11"
°C
Burner status "IF12"
Current modulating current "IF13"
Current burner output "IF14" %
--- "IF15"
Gas solenoid valve position ("On" or
"OFF")
"IF16"
Fan status ("On" or "OFF") "IF17"
Circulation pump status ("On" or
"OFF")
"IF18"
Diagnostics
Status checks
5837146
To Next Page
Loading...
