EasyManuals Logo

Viessmann Vitopend 100-W Installation And Service Instructions

Viessmann Vitopend 100-W
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Warning against incorrect use:
A faulty installation can lead to injury
and material losses.
The appliance must be installed in
accordance with the instructions and
applicable legal regulations.
Only engineers or persons approved
by the manufacturer may repair the
appliance or replace parts of it.
To ensure the safety of the product,
only original accessories can be
used.
The original flue pipe must be used.
Flue pipes of any other type must not
be used. The concentric flue pipe
must not be replaced by a single flue
pipe.
If it is necessary to replace the gas
governor or controls, please contact
the manufacturer.
Do not purchase any equipment
modified by dealers; only purchase
the manufacturer's original product.
This is the only way to ensure the
safety of the appliance.
When installing the appliance, install
a shut-off valve in the gas supply line.
Do not install the appliance near
electrical equipment with a strong
electromagnetic field, such as an
electromagnetic oven or microwave.
Do not remove any sealed parts from
the appliance.
Do not use caustic cleaning agents to
clean the appliance.
The appliance must not be installed
in bedrooms, living rooms or bath-
rooms.
Ensure that the appliance is not oper-
ated by children or other persons
who do not use it. Ensure that chil-
dren do not play with the appliance.
The overheating safety valve and the
hot water drain valve may only be
operated by specialists or competent
persons.
Do not install the appliance in closed
rooms.
After maintenance or inspection of
the appliance, the results must be
noted on the appliance by the main-
tenance or inspection engineer.
The power supply to the room must
be earthed.
The switch connected to the appli-
ance must not be located in a room
with a bath or shower.
The closure and the closure seal
must be checked.
Explain the frost protection measures
for the appliance to the user. The
user can add antifreeze to the heat-
ing water circuit if the appliance is not
operated for a long period in winter.
Otherwise the appliance or pipes can
be damaged by freezing.
Frost protection
!
Please note
Frost protection is only ensured
for as long as the power supply
is stable.
Warning notices
Warning notices according to GB25034-2010
5837146

Table of Contents

Other manuals for Viessmann Vitopend 100-W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Viessmann Vitopend 100-W and is the answer not in the manual?

Viessmann Vitopend 100-W Specifications

General IconGeneral
Fuel TypeGas
Max. Water Temperature85 °C
TypeCondensing Boiler
Gas TypeNatural gas / LPG
EfficiencyUp to 98%

Related product manuals