110
Function Code Operat-
ing level
Setting options Delivered
condition
"Cont type input EX2"
■ NC: Contact closed,
must be opened to acti-
vate
■ NO: Contact open, must
be closed to activate
5983 "F2" ■ "NC"
■ "NO"
"NO"
"Readjustm outside sen-
sor" (outside temperature
sensor)
6100 "F2" - 3 to 3 °C 0
"Saving sensors"
If "Yes" is set, the current
status of the sensor inputs
is saved (e.g after remov-
ing a sensor). This status is
then not recorded as a fault
when the sensors are
checked on a daily basis at
0:00 h.
6200 "F2" ■ "No"
■ "Yes"
"No"
"Save parameters"
If "Yes" is set, the current
parameter settings are
saved as new default set-
tings. The factory set-
tings are thus overrid-
den. This does not include
fields such as time and
date, programming unit,
wireless, service/special
operation, all time pro-
grams and metering func-
tions.
6204 "F2" ■ "No"
■ "Yes"
"No"
Codes
Changing codes
(cont.)
5618 294 GB
To Next Page
Loading...
