Burner
27
Burner Installation
Installation Instructions
Burner
To mount the burner, use the M8 bolts.
Observe all instructions supplied with
the burner.
Burner Information
Fuel
This boiler is for use with the Riello #2
fuel oil burner supplied by Viessmann
only. Use only the fuel stated on the
rating plate of the burner.
Burner calibration
Ensure that the combustion results of the
oil-fired burner mounted on this boiler are
verified after start-up.
If adjustments are necessary, always
verify results with a flue gas analyzer.
5285 838 v2.1
DO NOT USE GASOLINE
CRANKCASE DRAININGS OR ANY
OIL CONTAINING GASOLINE.
WARNING
To Next Page
Loading...
