21
Entering the password recall procedure
1. Press and hold Auto Sync on the remote control
for
3 seconds. The projector will display a coded
number on the screen.
2. Write down the number and turn off yo
ur
projector
.
3. Seek help from the local service center to decode
the number. You may
be required to provide
proof
of purchase documentation to verify th
at
you
are an authorized user of the projector.
The "XXX" shown in the above screenshot are numbers
that vary depending on different projector models.
Changing the password
1. Open the OSD menu and go to the SYSTEM > Security Settings > Change
Pass
word menu.
2. Press Enter. The message 'INPUT CURRENT PASSWORD' is displayed.
3. Enter the old password.
• If the password is correct, another message 'INPUT NEW PASSWORD'
is
d
isplayed.
• If the password is incorrect, the password error message is displayed
lasting for
5
seconds, and the message 'INPUT CURRENT PASSWORD' is displaye
d
for your retry
. You can press Exit to cancel or try another password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
6. You have successfully assigned a new password to the projector. Remember to en
ter
the new
password next time the projector is started.
7. To leave the OSD menu, press Exit.
The digits being input will be displayed as asterisks on-screen. Do make a note of your
password, and then keep the note in a safe place for later recall.
Disabling the password function
1. Open the OSD menu and go to the SYSTEM > Security Settings > Power On Lock
menu.
2. Press / to select Off.
3. The message 'INPUT PASSWORD' is displayed. Enter the current pass
word.
•
If the password is correct, the OSD menu returns to the Security Settings
page
with 'O
ff' shown in the row of Power On Lock. You will not have to enter
the
p
assword next time you turn on the projector.
• If the password is incorrect, the password error message is displayed
lasting for
5
seconds, and the message 'INPUT PASSWORD' is displayed for your retry.
You can press Exit to cancel or try another password.
Though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
