42
Function Description
Closed Caption
Closed Caption Enable
Activates the function by selecting On when the selected
input signal carries closed captions.
• Captions: An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are
closed captioned (usually marked as "CC" in TV listings).
This function is only available when a Composite video
input signal is selected and its system format is NTSC.
Caption Version
To view captions, select CC1, CC2, CC3, or CC4 (CC1
displays captions in the primary language in your area).
Reset Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Phase,
H. Size, OverScan, Language, Projector Position, High
Altitude Mode, Security Settings, Remote Control Code,
3D Sync, Filter Mode, HDMI Settings.
Language
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 19 for details.
Projector
Position
See "Choosing a location" on page 9 for details.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your
last key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in
a high altitude environment" on page 30 for details.
Quick Auto
Search
See "Switching input signal" on page 22 for details.
Security
Settings
See "Utilizing the password function" on page 20 for details.
Panel Key Lock See "Locking control keys" on page 30 for details.
Remote Control
Code
See "Remote control code" on page 7 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so
that you can connect the projector using a suitable RS232
cable and control the projector with RS232 commands.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
