16
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page 5). They are commercially available from electronics stores.
The connection illustrations below are for reference only. The connecting jacks available on
the projector vary with each projector model.
For detailed connection methods, see pages 17-19.
RS-232
MINI
USB
COMPUTER MONITOR OUT VIDEO LAN
HDMI
USB READER
USB WiFi
AUDIO
OUT
IN
To Next Page
Loading...
